Подгонянный PTFE Heat Shrink Tube тонкостенный рукав изоляции для медицинского катетера 4:1, 2:1 соотношение

PTFE Heat Shrink Tube Quick Details

Место происхождения: Китай

Фирменное наименование: YOZONE

Pipe Material: 100% pure PTFE

Material brand: Daikin chemical, DuPont. Chemours, Dongyue(Domestic)

Спецификация: подгонянные.

Длина: Подгонянный

Толщина: настраивается,

Форма: Круглый

Color: customized

Допуск: ±0,05 мм

Tensile strength: 25Mpa (different specification are different)

Химическая стойкость: стабилен в большинстве сред.

Электрические свойства: Устойчивость к изоляции

Heat shrink tubing manufacturers Сертификация: UL, CE, FDA, RoHS, REACH.

Стандарт: ISO9001:2008.

Испытание: SGS прошел

Образец: Бесплатно

PTFE Heat Shrink Tube Introduction

Yozonetech’s PTFE Термоусадочные трубки is perfect for applications needing protection from harsh chemicals and extreme temperatures up to 260°C (500°F). Supplied in an expanded form, the high temp shrink tubing contracts to its original size when heated, creating a snug fit around the substrate. It's commonly used to safeguard sensors, rollers, and wire splicing, and is available in a range of standard custom heat shrink tubing sizes and configurations.

Highly resistant to aggressive chemicals

Highest use temperature of fluoropolymers: 260°C (500°F)

Melting Temperature: +320 °C

Excellent electrical insulation properties

Easily applied to a variety of substrates

Typical Applications

Automotive sensor protection

Wire insulation

* Further colors on request.

** Thickness from 0,025 to 2,5 mm - value decreases with

increasing thickness.

Unless otherwise noted, all tests were conducted at room

temperature 23°C (73°F).

All values refer to special technical literature.

Additional sizes and colors are available upon request.