+86-13752771911
E-mail:ptfetube@yozonetech.cn
Medium Heavy Wall Heat Shrink Tubing
Product Overview
Adhesive lined protection for cable joints terminations and mechanical exposure
Yozonetech medium- and heavy-wall heat shrink tubing provides thicker protection for cable splices, terminations and related assemblies. The range includes medium-wall, heavy-wall and CATV-oriented constructions with model-specific dimensions and adhesive properties.
Request a quote: ptfetube@yozonetech.cn
Product Selection
SBRSM and SBRSW are the designated flame-retardant medium- and heavy-wall grades. SBRSM-NF and SBRSW-NF are explicitly non-flame-retardant. SBRSTV is the CATV-oriented medium-wall product. Select the wall, flame behavior, service temperature and adhesive system together; do not use one temperature range for the whole category.
Product Range
SBRSM — Flame Retardant Medium Wall Adhesive-Lined Heat Shrink Tubing
SBRSW — Flame Retardant Heavy Wall Adhesive-Lined Cross-Linked Polyolefin Heat Shrink Tubing
SBRSM-NF — Medium Wall Adhesive-Lined Cross-Linked Polyolefin Heat Shrink Tubing
SBRSW-NF — Heavy Wall Adhesive-Lined Cross-Linked Polyolefin Heat Shrink Tubing
SBRSTV — Medium Wall Adhesive-Lined Variable Heat Shrink Tubing
How to Specify Your Requirement
Identify the model first, then compare the supplied dimensions, fully recovered dimensions and installation space. Specify operating conditions, required flame or halogen performance, color, length, quantity and packaging. Certification and test references apply to the stated model and must be matched to the supplied product.
Dimensions are in mm unless another unit is stated. Operating temperature, minimum shrink temperature, full-recovery temperature and aging-test conditions describe different requirements. Keep them separate when selecting and installing the product.
SBRSM — Flame Retardant Medium Wall Adhesive-Lined Heat Shrink Tubing
SBRSM is a 3:1 flame-retardant medium-wall adhesive-lined heat-shrink tubing for low-voltage electrical and mechanical applications where lighter weight and greater flexibility are important. The source emphasizes sealing and protecting cable splices and terminations, impact and abrasion resistance, and a thermoplastic adhesive liner for environmental protection and insulation. Continuous operating temperature is -45°C to +125°C and fully shrink temperature is 125°C. RoHS is shown in the source.
Operating and Recovery Data
| Параметр | Catalog information |
| Operating temperature | −45°C to 125°C |
| Shrink or installation condition | 125°C |
| Recovery ratio or product form | 3:1 |
Model features: Adhesive lined construction; Cable splice and termination protection; Impact and abrasion resistance; Medium wall design for lower weight and flexibility.
Размеры
| Size (mm) | Expanded ID (mm) | Recovered ID (mm) | Jacket (mm) | Adhesive (mm) | Total wall (mm) | Length (m/pc) |
| 10.2/3.0 | 10.2 | 3.0 | 1.40±0.20 | 0.35±0.15 | 1.75±0.30 | 1.22 |
| 16.0/5.0 | 16.0 | 5.0 | 1.50±0.20 | 0.40±0.15 | 1.90±0.30 | 1.22 |
| 19.1/5.6 | 19.1 | 5.6 | 2.00±0.20 | 0.45±0.15 | 2.45±0.40 | 1.22 |
| 25.0/8.0 | 25.0 | 8.0 | 2.00±0.20 | 0.45±0.15 | 2.45±0.40 | 1.22 |
| 28.0/9.0 | 28.0 | 9.0 | 2.00±0.20 | 0.50±0.20 | 2.60±0.40 | 1.22 |
| 35.0/10.2 | 35.0 | 10.2 | 2.20±0.20 | 0.78±0.20 | 2.70±0.40 | .1.22 |
| 38.1/12.0 | 38.1 | 12.0 | 2.20±0.20 | 0.50±0.20 | 2.70±0.40 | 1.22 |
| 43.2/12.7 | 43.2 | 12.7 | 2.20±0.25 | 0.50±0.20 | 2.70±0.40 | 1.22 |
| 52.1/16.0 | 52.1 | 16.0 | 2.30±0.25 | 0.50±0.20 | 2.80±0.45 | 1.22 |
| 55.0/16.0 | 55.0 | 16.0 | 2.30±0.25 | 0.50±0.20 | 2.80±0.45 | 1.22 |
| 63.0/19.0 | 63.0 | 19.0 | 2.50±0.25 | 0.50±0.20 | 3.00±0.45 | 1.22 |
| 75.0/22.0 | 75.0 | 22.0 | 2.60±0.25 | 0.50±0.20 | 3.00±0.45 | 1.22 |
| 85.0/25.0 | 85.0 | 25.0 | 2.80±0.35 | 0.50±0.20 | 3.30±0.45 | 1.22 |
| 95.0/29.0 | 95.0 | 29.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
| 115.0/34.0 | 115.0 | 34.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
| 140.0/42.0 | 140.0 | 42.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
| 160.0/48.0 | 160.0 | 48.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
| 180.0/58.0 | 180.0 | 58.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
| 200.0/60.0 | ≥200.0 | ≤60.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
| 230.0/69.0 | ≥230.0 | ≤69.0 | 3.10±0.45 | 0.60±0.20 | 3.70±0.50 | 1.22 |
Technical performance
| Недвижимость | Метод испытания | Standard | Typical performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥10.4 | 11.5 |
| Elongation(%) | ASTM D2671 | ≥300 | 450 |
| Tensile Strength after aging (MPa) | UL 224, 158°C × 168 h | ≥7.3 | 8.5 |
| Elongation after aging(%) | UL 224, 158°C × 168 h | ≥200 | 350 |
| Dielectric strength(kV/mm) | IEC 60243 | ≥15 | 17.5 |
| Volume resistivity(Ω·cm) | IEC 60093 | ≥1×10¹⁴ | 2.5×10¹⁴ |
Adhesive properties
| Недвижимость | Метод испытания | Performance / requirement |
| Поглощение воды | ASTM D570 | ≤0.2% |
| Softening Point(°C) | ASTM E28 | 95±5 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
Catalog option: tubing without adhesive is available on request. Confirm the exact construction with the quotation.
SBRSW — Flame Retardant Heavy Wall Adhesive-Lined Cross-Linked Polyolefin Heat Shrink Tubing
SBRSW is a 3:1 flame-retardant heavy-wall product for electrical splices and terminations where maximum flame retardancy and strong insulation/sealing are required. The source states that the tubing resists splitting or rupture during installation even when overheated. It uses a thermoplastic adhesive liner, operates continuously from -45°C to +125°C and fully shrinks at 125°C. Tubing without adhesive is available upon request.
Operating and Recovery Data
| Параметр | Catalog information |
| Operating temperature | −45°C to 125°C |
| Shrink or installation condition | 125°C |
| Recovery ratio or product form | 3:1 |
Model features: Heavy wall crosslinked polyolefin; Thermoplastic adhesive lining; Insulation and sealing of electrical splices and terminations.
Размеры
| Size (mm) | Expanded ID (mm) | Recovered ID (mm) | Jacket (mm) | Adhesive (mm) | Total wall (mm) | Length (m/pc) |
| 9.0/3.0 | 9.0 | 3.0 | 2.00±0.35 | 0.45±0.20 | 2.45±0.35 | 1.22 |
| 13.0/4.0 | 13.0 | 4.0 | 2.30±0.35 | 0.45±0.20 | 2.80±0.35 | 1.22 |
| 20.0/6.0 | 20.0 | 6.0 | 2.30±0.35 | 0.60±0.20 | 2.90±0.35 | 1.22 |
| 28.0/9.0 | 28.0 | 9.0 | 2.30±0.35 | 0.70±0.20 | 3.00±0.40 | 1.22 |
| 33.0/10.2 | 33.0 | 10.2 | 2.80±0.35 | 0.70±0.20 | 3.60±0.40 | 1.22 |
| 38.1/12.0 | 38.1 | 12.0 | 3.10±0.35 | 0.70±0.20 | 3.85±0.50 | 1.22 |
| 43.2/12.7 | 43.2 | 12.0 | 3.50±0.35 | 0.70±0.20 | 4.20±0.50 | 1.22 |
| 51.0/16.0 | 55.0 | 16.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 70.0/21.0 | 75.0 | 22.0 | 3.65±0.40 | 0.70±0.20 | 4.40±0.50 | 1.22 |
| 85.0/25.0 | 85.0 | 25.0 | 3.65±0.40 | 0.70±0.20 | 4.40±0.50 | 1.22 |
| 105.0/30.0 | 105.0 | 30.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 120.0/36.0 | 120.0 | 36.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 130.0/36.0 | 130.0 | 36.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
| 140.0/42.0 | 140.0 | 42.0 | 3.85±0.40 | 0.70±0.20 | 4.50±0.50 | 1.22 |
Technical performance
| Недвижимость | Метод испытания | Standard | Typical performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥10.4 | 11.5 |
| Elongation(%) | ASTM D2671 | ≥300 | 450 |
| Tensile Strength after aging (MPa) | UL 224, 158°C × 168 h | ≥7.3 | 8.5 |
| Elongation after aging(%) | UL 224, 158°C × 168 h | ≥200 | 350 |
| Dielectric strength(kV/mm) | IEC 60243 | ≥15 | 17.5 |
| Volume resistivity(Ω·cm) | IEC 60093 | ≥1×10¹⁴ | 2.5×10¹⁴ |
Adhesive properties
| Недвижимость | Метод испытания | Performance / requirement |
| Поглощение воды | ASTM D570 | ≤0.2% |
| Softening Point(°C) | ASTM E28 | 95±5 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
Catalog option: tubing without adhesive is available on request. Confirm the exact construction with the quotation.
SBRSM-NF — Medium Wall Adhesive-Lined Cross-Linked Polyolefin Heat Shrink Tubing
SBRSM-NF is a 3:1 medium-wall adhesive-lined cross-linked polyolefin heat-shrink tubing for low-voltage electrical and mechanical applications. The source explicitly describes this product as not flame-retardant. It provides cable splice and termination sealing, rugged mechanical protection, moisture sealing, strain relief and resistance to impact and abrasion. Continuous operating temperature is -45°C to +125°C and fully shrink temperature is 125°C. RoHS compliance is shown.
Operating and Recovery Data
| Параметр | Catalog information |
| Operating temperature | −45°C to 125°C |
| Shrink or installation condition | 125°C |
| Recovery ratio or product form | 3:1 |
Model features: Medium wall construction; Not flame retardant; Mechanical protection and strain relief; Thermoplastic adhesive lining; Impact and abrasion resistance.
Размеры
| Size (mm) | Expanded ID (mm) | Recovered ID (mm) | Jacket (mm) | Adhesive (mm) | Total wall (mm) | Length (m/pc) |
| 6.0/2.0 | 6.0 | 2.0 | 1.40±0.20 | 0.45±0.15 | 1.85±0.30 | 1.22 |
| 8.0/2.0 | 8.0 | 2.0 | 1.40±0.20 | 0.45±0.15 | 1.85±0.30 | 1.22 |
| 10.2/3.0 | 10.2 | 3.0 | 1.40±0.20 | 0.50±0.15 | 1.90±0.30 | 1.22 |
| 12.0/3.0 | 12.0 | 3.0 | 1.40±0.20 | 0.50±0.15 | 1.90±0.30 | 1.22 |
| 16.0/5.0 | 16.0 | 5.0 | 1.50±0.20 | 0.55±0.20 | 2.15±0.35 | 1.22 |
| 19.1/5.6 | 19.1 | 5.6 | 1.80±0.20 | 0.60±0.20 | 2.40±0.40 | 1.22 |
| 22.0/6.0 | 22.0 | 6.0 | 2.00±0.30 | 0.60±0.20 | 2.60±0.40 | 1.22 |
| 25.0/8.0 | 25.0 | 8.0 | 2.00±0.30 | 0.65±0.20 | 2.70±0.40 | 1.22 |
| 28.0/6.0 | 28.0 | 6.0 | 2.40±0.30 | 0.95±0.25 | 3.30±0.45 | 1.22 |
| 33.0/8.0 | 33.0 | 8.0 | 2.50±0.30 | 0.80±0.25 | 3.30±0.45 | 1.22 |
| 38.1/12.0 | 38.1 | 12.0 | 2.40±0.30 | 0.80±0.25 | 3.30±0.45 | 1.22 |
| 43.2/12.7 | 43.2 | 12.7 | 2.40±0.30 | 0.80±0.25 | 3.30±0.45 | 1.22 |
| 55.0/16.0 | 55.0 | 16.0 | 2.40±0.30 | 0.80±0.25 | 3.30±0.45 | 1.22 |
| 65.0/19.0 | 65.0 | 19.0 | 2.50±0.30 | 0.80±0.25 | 3.30±0.45 | 1.22 |
| 75.0/22.0 | 75.0 | 22.0 | 2.90±0.30 | 0.80±0.25 | 3.70±0.50 | 1.22 |
| 85.0/25.0 | 85.0 | 25.0 | 2.90±0.30 | 0.80±0.25 | 3.70±0.50 | 1.22 |
| 95.0/30.0 | 95.0 | 30.0 | 3.00±0.30 | 0.80±0.25 | 3.70±0.50 | 1.22 |
| 115.0/34.0 | 115.0 | 34.0 | 3.00±0.30 | 0.80±0.25 | 3.70±0.50 | 1.22 |
| 140.0/42.0 | 140.0 | 42.0 | 3.00±0.30 | 0.80±0.25 | 3.70±0.50 | 1.22 |
| 160.0/50.0 | 160.0 | 50.0 | 3.10±0.30 | 0.80±0.25 | 3.70±0.50 | 1.00 |
| 180.0/65.0 | 180.0 | 65.0 | 3.10±0.30 | 0.80±0.25 | 3.70±0.50 | 1.00 |
| 200.0/69.0 | 200.0 | 69.0 | 3.10±0.30 | 0.80±0.25 | 3.70±0.50 | 1.00 |
| 230.0/78.0 | 230.0 | 78.0 | 3.10±0.30 | 0.80±0.25 | 3.70±0.50 | 1.00 |
Technical performance
| Недвижимость | Метод испытания | Standard | Typical performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥14 | 15 |
| Elongation(%) | ASTM D2671 | ≥400 | 450 |
| Tensile Strength after aging (MPa) | UL 224, 158°C × 168 h | ≥12 | 12.5 |
| Elongation after aging(%) | UL 224, 158°C × 168 h | ≥300 | 350 |
| Dielectric strength(kV/mm) | IEC 60243 | ≥15 | 17.5 |
| Volume resistivity(Ω·cm) | IEC 60093 | ≥1×10¹⁴ | 2.5×10¹⁴ |
Adhesive properties
| Недвижимость | Метод испытания | Performance / requirement |
| Поглощение воды | ASTM D570 | w0.2% |
| Softening Point(°C) | ASTM E28 | 95±5 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
Catalog option: tubing without adhesive is available on request. Confirm the exact construction with the quotation.
SBRSW-NF — Heavy Wall Adhesive-Lined Cross-Linked Polyolefin Heat Shrink Tubing
SBRSW-NF is a 3:1 heavy-wall adhesive-lined cross-linked polyolefin product for demanding cable-joint and termination protection. The source states that it is not flame-retardant and rates it for 1 kV, 90°C continuous-use applications. It is intended for severe mechanical requirements including underground/submersible and direct-burial installations, with high impact, abrasion, corrosion and chemical resistance. Continuous operating temperature is -45°C to +110°C and full shrink temperature is 125°C. Tubing without adhesive is available upon request.
Operating and Recovery Data
| Параметр | Catalog information |
| Operating temperature | −45°C to 110°C |
| Shrink or installation condition | 125°C |
| Recovery ratio or product form | 3:1 |
Model features: Heavy wall construction; Not flame retardant; Mechanical protection for cable joints and terminations; Catalog lists 1 kV and 90°C continuous use applications; Resistance to impact, abrasion and corrosion.
Размеры
| Size (mm) | Expanded ID (mm) | Recovered ID (mm) | Jacket (mm) | Adhesive (mm) | Total wall (mm) | Length (m/pc) |
| 8.0/2.0 | 8.0 | 2.0 | 1.80±0.30 | 0.55±0.20 | 2.35±0.35 | 1.22 |
| 9.0/3.0 | 9.0 | 3.0 | 2.00±0.30 | 0.55±0.20 | 2.55±0.40 | 1.22 |
| 13.0/4.0 | 13.0 | 4.0 | 2.30±0.30 | 0.55±0.20 | 2.85±0.40 | 1.22 |
| 16.0/5.0 | 16.0 | 5.0 | 2.30±0.30 | 0.60±0.20 | 2.90±0.50 | 1.22 |
| 22.0/6.0 | 22.0 | 6.0 | 2.50±0.40 | 0.60±0.25 | 3.10±0.50 | 1.22 |
| 28.0/6.0 | 28.0 | 6.0 | 2.70±0.40 | 0.70±0.25 | 3.40±0.50 | 1.22 |
| 33.0/8.0 | 33.0 | 8.0 | 2.80±0.40 | 0.80±0.25 | 3.60±0.60 | 1.22 |
| 38.1/12.0 | 38.1 | 12.0 | 3.10±0.50 | 0.80±0.25 | 3.90±0.60 | 1.22 |
| 43.2/12.0 | 43.2 | 12.0 | 3.50±0.50 | 0.80±0.25 | 4.30±0.70 | 1.22 |
| 55.0/16.0 | 55.0 | 16.0 | 3.60±0.50 | 0.80±0.25 | 4.40±0.70 | 1.22 |
| 65.0/19.0 | 65.0 | 19.0 | 3.60±0.50 | 0.80±0.25 | 4.40±0.70 | 1.22 |
| 75.0/22.0 | 75.0 | 22.0 | 3.60±0.50 | 0.80±0.25 | 4.40±0.70 | 1.22 |
| 85.0/25.0 | 85.0 | 25.0 | 3.60±0.50 | 0.80±0.25 | 4.40±0.70 | 1.22 |
| 95.0/30.0 | 95.0 | 30.0 | 3.60±0.50 | 0.80±0.25 | 4.40±0.70 | 1.22 |
| 105.0/30.0 | 105.0 | 30.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.22 |
| 120.0/39.0 | 120.0 | 39.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.22 |
| 130.0/40.0 | 130.0 | 40.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.22 |
| 140.0/42.0 | 140.0 | 42.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.22 |
| 160.0/50.0 | 160.0 | 50.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.00 |
| 180.0/60.0 | 180.0 | 60.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.00 |
| 200.0/69.0 | 200.0 | 69.0 | 3.80±0.60 | 0.80±0.25 | 4.60±0.70 | 1.00 |
Technical performance
| Недвижимость | Метод испытания | Standard | Typical performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥14 | 15 |
| Elongation(%) | ASTM D2671 | ≥400 | 450 |
| Tensile Strength after aging (MPa) | UL 224, 158°C × 168 h | ≥12 | 12.5 |
| Elongation after aging(%) | UL 224, 158°C × 168 h | ≥300 | 350 |
| Dielectric strength(kV/mm) | IEC 60243 | ≥15 | 17.5 |
| Volume resistivity(Ω·cm) | IEC 60093 | ≥1×10¹⁴ | 2.5×10¹⁴ |
Adhesive properties
| Недвижимость | Метод испытания | Performance / requirement |
| Поглощение воды | ASTM D570 | ≤0.27 |
| Softening Point(°C) | ASTME28 | 95±5 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
Catalog option: tubing without adhesive is available on request. Confirm the exact construction with the quotation.
SBRSTV — Medium Wall Adhesive-Lined Variable Heat Shrink Tubing
SBRSTV combines a heat-shrinkable outer tube with an adhesive liner and is presented in the source as a CATV-industry standard for splice and connector protection. It uses a 3:1 shrink ratio and is flame-retardant. The source highlights weathering resistance, moisture and contamination resistance, heat-indicating lines, environmental sealing and resistance to common fluids and solvents. Continuous operating temperature is -45°C to +110°C and fully shrink temperature is 125°C. RoHS is shown.
Operating and Recovery Data
| Параметр | Catalog information |
| Operating temperature | −45°C to 110°C |
| Shrink or installation condition | 125°C |
| Recovery ratio or product form | 3:1 |
Model features: Adhesive lined construction; CATV splice and connector protection; Flame retardant; Heat indicating lines; Weather and moisture resistance.
Размеры
| Size (mm) | Expanded ID (mm) | Recovered ID (mm) | Jacket (mm) | Adhesive (mm) | Total wall (mm) | Length (m/pc) |
| 10.2/3.8 | 10.2 | 3.8 | 1.40±0.20 | 0.50±0.10 | 1.90±0.25 | 1.22 |
| 19.0/5.6 | 19.0 | 5.6 | 1.80±0.20 | 0.60±0.15 | 2.40±0.30 | 1.22 |
| 28.0/6.0 | 28.0 | 6.0 | 2.40±0.30 | 0.95±0.20 | 3.30±0.35 | 1.22 |
| 33.0/8.0 | 33.0 | 8.0 | 2.50±0.30 | 0.80±0.15 | 3.30±0.35 | 1.22 |
| 38.1/12.0 | 38.1 | 12.0 | 2.40±0.30 | 0.80±0.15 | 3.30±0.35 | 1.22 |
| 43.2/12.7 | 43.2 | 12.7 | 2.40±0.30 | 0.80±0.15 | 3.30±0.35 | 1.22 |
| 55.0/16.0 | 55.0 | 16.0 | 2.40±0.30 | 0.80±0.15 | 3.30±0.35 | 1.22 |
| 70.0/25.4 | 70.0 | 25.4 | 2.80±0.30 | 0.60±0.15 | 3.40±0.40 | 1.22 |
Technical performance
| Недвижимость | Метод испытания | Standard | Typical performance |
| Tensile Strength(MPa) | ASTM D2671 | ≥10.4 | 11.5 |
| Elongation(%) | ASTM D2671 | ≥300 | 450 |
| Tensile Strength after aging (MPa) | UL 224, 158°C × 168 h | ≥7.3 | 8.5 |
| after aging(%) Elongation | UL 224, 158°C × 168 h | ≥200 | 350 |
| Dielectric strength(kV/mm) | IEC 60243 | ≥15 | 17.5 |
| Volume resistivity(Ω·cm) | IEC 60093 | ≥1×10¹⁴ | 2.5×10¹⁴ |
Adhesive properties
| Недвижимость | Метод испытания | Performance / requirement |
| Поглощение воды | ASTM D570 | ≤0.2% |
| Softening Point(°C) | ASTM E28 | 85 |
| Strength of peeling(PE) | ASTM D 1000 | 120N/25mm |
| Strength of peeling(AL) | ASTM D 1000 | 80N/25mm |
Applications and Installation
Typical use follows the selected model: wire and cable insulation, splice or component protection, environmental sealing, harness identification or specialty fluid exposure. Prepare and clean the substrate, protect heat-sensitive components and use controlled heating appropriate to the exact product. Check complete recovery and adhesive flow where applicable.
Frequently Asked Questions
Which model should I choose
SBRSM and SBRSW are the designated flame-retardant medium- and heavy-wall grades. SBRSM-NF and SBRSW-NF are explicitly non-flame-retardant. SBRSTV is the CATV-oriented medium-wall product. Select the wall, flame behavior, service temperature and adhesive system together; do not use one temperature range for the whole category.
Are all models flame retardant
Use the flame-performance statement of the exact model. Halogen-free, low-smoke and flame-retardant are separate requirements. A category title does not establish a shared rating.
How do I choose the size
Select the model and compare its supplied size with the largest assembly dimension and its recovered size with the required final fit. Check wall, tolerances, length and packaging in the corresponding table.
Is shrink temperature the operating temperature
No. Shrink or recovery temperature is an installation condition. Continuous operating temperature and short-duration laboratory aging or heat-shock tests are separate values.
Are all performance values guaranteed limits
Keep the distinction between standard requirements and typical test results shown in the tables. Agree the exact specification, acceptance limits, test method and product documentation with the order.
Can I order custom colors lengths or packaging
Send the exact model, dimensions, color, length, quantity and packaging requirements. Availability and nonstandard options are confirmed with the quotation.
Request a Quote
Send the model, required size, application, operating conditions, quantity, color and packaging. For markers, include print format and printer; for busbars, include voltage class and geometry; for caps and connectors, include cable or wire dimensions.
Электронная почта: ptfetube@yozonetech.cn
WhatsApp / Tel / WeChat: +86 13752771911
Website: www.chinaptfetube.com