Tubo termorretrátil de parede dupla PTFE/FEP Fabricante OEM personalizado

Thick wall heat shrink tubing Descrição do produto

The double-wall heat shrinkable tube is mainly used to protect the components from corrosive gas and liquid from outside. The double-wall heat shrinkable design includes an outer layer of PTFE tube, and then a fusible FEP tube lining. The melting point of FEP is much lower than the shrinking temperature of PTFE, so when heated, FEP will melt and cover the components first, and then the PTFE tube will shrink and wrap the FEP. After cooling treatment, FEP solidifies and tightly combines with PTFE and components to form a tight protective layer to seal the entrance. The maximum operating temperature of the packaged components is approximately 210°C (410°F).

[embed]https://youtu.be/-hgILz2qbT4[/embed]

[embed]https://youtu.be/Z_qx0oQW3R8[/embed]

Thick wall heat shrink tubing Application

The application range of double-wall heat shrinkable tubing includes wire and cable harnesses, connectors, joints and any electrical terminals that may need to be protected from damage by moisture or corrosive liquids.

Thick wall heat shrink tubing Especificação do produto

Local de origem: China

Nome da marca: YOZONE

Model Number: tsmcay-11

Pipe Material: 100% Virgin PTFE & FEP

Marca do material: Daikin Chemical, DuPont. Dongyue & Chenguang (nacional)

Especificação: personalizado.

Comprimento: Personalizado

Espessura: personalizada,

Forma: Redondo

Color: Transparent or Black (Designed for hiding the detail of product)

Tolerância: ±0,05 mm

Tensile strength: 10.4Mpa (different specification are different)

Working Temperature: -200 - 205°C

Resistência química: estável na maioria dos meios.

Propriedade eléctrica: Resistente ao isolamento

Certificação: UL, CE, FDA, RoHS, REACH.

Norma: ISO9001:2008.

Teste: Aprovado pela SGS

Amostra: Grátis

Pagamento: T/T

Vida útil: Depende do ambiente, por favor consulte os nossos engenheiros.

Aplicações: Transporte de petróleo, processamento de alimentos, eletricidade, etc.

Thick wall heat shrink tubing Capacidade de fornecimento

20000 Rolls per Month Plastic PTFE Dual Wall tubo termo-retrátil

Thick wall heat shrink tubing Prazo de execução

Thick wall heat shrink tubing Embalagem e entrega

Plastic PTFE Dual Wall Heat Shrink Tube into Spool in Carton or Wooden Pallet

Porto: Tianjin, Shanghai, Shenzhen, Qingdao.

PTFE/FEP  DOUBLE-LAYER Shrink Tube:

Heat Shrink Tubing Offering a Tight,

Moisture-Resistant, Wear-Proof Encapsulation

Outer tubing of PTFE shrinks for tight fit when heat is applied.

Inner layer of FEP melts and flows to encapsulate parts.

PTFE/FEP heat shrink tube is constructed with an exterior of heat shrink PTFE and an inner layer of FEP. It is easy to apply, and is designed to provide a tight, moisture-proof bond over wires, cables, connectors, splices, terminals, etc.

The PTFE shrinks tightly over inserted parts when the covered section is heated, while the FEP melts and flows into a solid or near-solid encapsulation with a fit so tight that it can withstand the most severe stresses involving pull or vibration. We provides all the outstanding electrical, chemical, and mechanical properties of PTFE including a service temperature up to 450°F/232°C. Custom specifications and tolerances quoted upon request.

We are one of the professional heat shrink tubing suppliers and manufacturers of fep heat shrink tubing in China, if you are interested in our fep tubing, chemfluor fep tubing, fep corrugated tubing, high purity pfa tubing made in China, please contact us immediately!