+86-13752771911
E-mail:ptfetube@yozonetech.cn
noticias
-
Choosing 304 or 316 Stainless Steel Braid for PTFE Hose
Leer másYozonetech Choose the stainless steel braid of a PTFE hose by reviewing its external exposure and the complete hose specification. A change from 304 to 316 may address a corrosion concern, but it does not automatically increase the assembly’s working pressure or qualify the hose for a new process fluid. Yozonetech lists PTFE stainless steel […]
-
Specifying Silicone Reinforced Tubing Connections and Wall Thickness
Leer másYozonetech Specify silicone reinforced tubing together with the connection it must fit. The bore, outside diameter, reinforcement and retention method all affect the assembly. A drawing and an agreed sample check give the supplier a much clearer requirement than a request for a nominal hose size alone. This guide helps buyers prepare a request for […]
-
Comparing PTFE FEP and PFA Heat Shrink Tubing
Leer másYozonetech Choose fluoropolymer heat shrink tubing by checking three things together: whether it can pass over the component, whether it can recover to the required fit and whether the assembly can tolerate the installation process. Only then compare the material’s service capabilities and the evidence required for the application. PTFE heat shrink tubing, FEP heat […]
-
PTFE Tubing Dimensions and Tolerances for Purchasing
Leer másYozonetech For a useful PTFE tubing quotation, specify the inner diameter, outer diameter and permitted variation in each. Add the connection requirements and a measurement agreement. A nominal size alone cannot tell the buyer whether the delivered tube will fit a port, pass a component or meet a minimum wall requirement. This guide explains how […]
-
Silicone and PVC Reinforced Tubing Selection Guide
Leer másYozonetech Select reinforced tubing around the complete duty cycle: what it carries, how it is cleaned, the pressure or vacuum it experiences and how it is installed. Silicone and PVC describe material families; neither name defines the performance of a finished hose. This guide helps buyers compare silicone reinforced tubing and PVC reinforced hose using the same […]
-
PTFE Stainless Steel Braided Hose Selection and Purchasing Guide
Leer másYozonetech A purchase request for “PTFE stainless steel braided tubing” describes a product family, but it does not yet define the hose a machine or project needs. Start by agreeing the medium, operating conditions, dimensions and end connections. Then ask the supplier to confirm an appropriate construction and an assembly specification. This guide helps engineering […]
-
Подбор термоусадочной трубки FEP для защиты электронных компонентов
Leer másYozonetech Термоусадочную трубку нужно проверить дважды: при надевании и после усадки. Ниже — практическое руководство с условным расчётом и кратким описанием опыта работы с заказчиком. Иллюстрация создана ИИ; это не фотография объекта заказчика и не протокол испытаний. Для подбора термоусадочной трубки сначала нужно описать защищаемую деталь. Трубка должна свободно надеваться через самый крупный участок и […]
-
FEP Heat Shrink Tubing Sizing Guide for Electronic Protection
Leer másYozonetech A heat shrink sleeve has to fit twice: over the part during installation and around the protected area after recovery. Here is a practical sizing guide, with a clearly identified illustrative calculation and a brief customer project note. AI-generated application illustration; not a customer-site photograph or test record. A good heat shrink inquiry starts […]