+86-13752771911
E-mail:ptfetube@yozonetech.cn
sin categoría
-
Why is the FEP PTFE double-wall heat shrinkable sleeve anti-ultraviolet and flame retardant
Leer másYozonetech FEP PTFE Double-wall heat shrinkable sleeves are basically made of EVA5110, LDPE1I2A, hot melt adhesive, polyethylene, polypropylene, polyvinyl chloride, polyvinylidene fluoride and various special materials. When used in outdoor conditions and exposed to a large amount of ultraviolet rays, the FEP PTFE heat shrinkable tube will accelerate the aging and reduce the performance, such […]
-
PTFE FEP Dual Wall Heat Shrink Tube Transparent And Black
Leer másPTFE FEP Dual Wall Heat Shrink Tube Transparent And Black The double-wall heat shrinkable tube is mainly used to protect the components from corrosive gas and liquid from outside.The double-wall heat-shrinkable design includes an outer layer of PTFE tube, and then a fusible FEP tube lining. The melting point of FEP is much lower than […]
-
¿Cómo solucionar las fugas de la lámina de la placa solar de PC?
Leer másPC sun board sheet is more and more widely used in our daily life, especially in the advertising industry. However, in many cases, due to improper handling of PC solar panels, it will often cause water leakage in PC solar panels. How to solve this problem? Let’s take a look at the introduction of the YOZONETECH […]
-
China Bombas peristálticas
Leer másPeristaltic pumps are mainly used in automatic ultrasonic cleaning and disinfection machines for automatic quantitative addition and injection of enzymes, cleaning agents and disinfectants. Fully automatic ultrasonic cleaning and disinfection machine can complete ultrasonic cleaning, rinsing, boiling disinfection, drying and other functions, can greatly save the amount of cleaning work, improve work efficiency. Medically fully […]
-
China PEEK Rod performance
Leer másPEEK rod, Chinese named polyether ketone rod, is a semi-finished profile using PEEK raw material extrusion molding, with high temperature, high wear resistance, high tensile strength, good flame retardant and other characteristics. PEEK rods can be used to process PEEK parts of various sizes and to manufacture demanding mechanical components such as gears, bearings, valve […]
-
YOZONETECH PTFE SELAS and RODS
Leer másDue to the corrosion resistance defects of materials such as rubber, glass and metal alloys, it is difficult to meet the environment where temperature, pressure and chemical media coexist under harsh conditions, and the losses caused by this are quite amazing. PTFE material has corrosion resistance and has become the main corrosion-resistant material in petroleum, […]
-
YOZONETECH FEP authoritative performance parameters in 2021
Leer másEnglish name: FEP (ethylene fluoride) YOZONETECH FEP is a co-property of tetluoroethylene and hexafluoropropylene. The content of hexafluoropropylene is about 15%. It is a modified material for Teflon. Full name: perfluoroethylene propylene copolymer (perfluoroethylene copolymer), referred to as polyperfluoroethylene propylene, also known as F46. FEP has a crystal melting point of 580 degrees F […]
-
Propiedades del PTFE: el estándar de apariencia del PTFE
Leer más1. The color of teflon is the color of resin. 2. The quality should be uniform and the appearance should be flat. No defects such as cracks, bubbles, decontamination, mechanical damage and knife marks are allowed. 3. Slight cloud mottling is allowed. 4. No more than 1 non-metallic impurity with diameter of 0.1-0.5mm and no […]