+86-13752771911
E-mail:ptfetube@yozonetech.cn
PSU Engineering Plastic
PSU Material Overview
PSU (polysulfone) is presented in the supplied brochure as a transparent amber, heat-resistant, high-performance thermoplastic engineering plastic. The brochure highlights its high mechanical strength, good electrical properties, hydrolysis resistance, radiation resistance, dimensional stability and resistance to creep. It is positioned for applications where conventional engineering plastics may not provide sufficient thermal, mechanical or chemical performance.
The source describes PSU as suitable for long-term use across a demanding temperature range and highlights repeated steam sterilization, food-contact-related inertness, high-energy radiation resistance and electrical insulation performance.
Key PSU Performance Characteristics
| Característica | Brochure-Based Description |
| Material type | High-performance thermoplastic engineering plastic; transparent amber appearance is shown |
| Temperature performance | The brochure states a highest air temperature for continuous service of 150°C in its performance section |
| Hydrolysis resistance | Good hydrolysis resistance; suitable for repeated steam sterilization |
| Mechanical strength | Good mechanical strength and rigidity within the stated temperature range |
| Dimensional stability | Good dimensional stability |
| Creep resistance | Good creep resistance |
| Physiological inertness | The brochure states physiological inertness suitable for food-contact applications |
| Radiation resistance | Good resistance to high-energy radiation, including gamma and X-ray radiation |
| Electrical properties | Good electrical insulation and dielectric properties |
PSU Material & Appearance
The brochure shows PSU in several resin appearances, including transparent, amber-transparent, white and blue-transparent forms. The supplied page also presents PSU sheet, rod, machined parts and sheet stock as representative product forms.
| Material / Appearance | Source Presentation |
| PSU transparent resin | Transparent appearance |
| PSU amber transparent resin | Amber / transparent appearance |
| PSU white resin | White appearance |
| PSU blue transparent resin | Blue transparent appearance |
PSU Product Forms
| Product Form | Typical Supply Purpose |
| PSU Sheet / Plate | Semi-finished flat stock for fabrication and machining |
| PSU Rod | Round stock for turning, drilling, milling and other machining operations |
| PSU Machined Parts | Application-specific components manufactured from PSU stock |
| PSU Sheet Stock | Flat material for custom component production |
Complete PSU Rod Specification
| Diameter (mm) | Tolerance (mm) | Density (KG/M³) | Weight (KG/M) |
| 8 | +0.5 - +1 | 1.24 | 0.08 |
| 10 | +0.4 - +0.6 | 1.24 | 0.12 |
| 12 | +0.3 - +0.9 | 1.24 | 0.16 |
| 15 | +0.6 - +1 | 1.24 | 0.24 |
| 20 | +0.3 - +1 | 1.24 | 0.44 |
| 25 | +0.3 - +1 | 1.24 | 0.66 |
| 30 | +0.4 - +1 | 1.24 | 1.01 |
| 35 | +0.2 - +1 | 1.24 | 1.3 |
| 40 | +0.2 - +1.5 | 1.24 | 1.73 |
| 45 | +0.3 - +1.5 | 1.24 | 2.15 |
| 50 | +0.4 - +2.0 | 1.24 | 2.69 |
| 60 | +0.8 - +2.0 | 1.24 | 3.82 |
| 70 | +0.5 - +3.0 | 1.24 | 5.24 |
| 75 | +0.5 - +3.0 | 1.24 | 5.95 |
| 80 | +0.5 - +3.0 | 1.24 | 7.01 |
| 90 | +0.5 - +3.0 | 1.24 | 8.79 |
| 100 | +0.5 - +3.0 | 1.24 | 10.6 |
Complete PSU Sheet / Plate Specification
| Thickness (mm) | Tolerance (mm) | Density (KG/M³) | Weight (KG/M) |
| 6 | +0.2 - +0.7 | 1.24 | 6.3 |
| 8 | +0.2 - +0.7 | 1.24 | 8.4 |
| 10 | +0.2 - +1.2 | 1.24 | 10.7 |
| 12 | +0.3 - +1.5 | 1.24 | 12.3 |
| 15 | +0.3 - +1.5 | 1.24 | 15.7 |
| 20 | +0.3 - +1.5 | 1.24 | 20.3 |
| 25 | +0.3 - +1.5 | 1.24 | 25.6 |
| 30 | +0.5 - +2.5 | 1.24 | 30.8 |
| 35 | +0.5 - +2.5 | 1.24 | 35.4 |
| 40 | +0.5 - +2.5 | 1.24 | 40.3 |
| 45 | +0.5 - +2.5 | 1.24 | 45.6 |
| 50 | +0.5 - +2.5 | 1.24 | 50.4 |
| 60 | +0.5 - +3.5 | 1.24 | 60.5 |
| 80 | +0.5 - +5.0 | 1.24 | 80.1 |
| 100 | +0.5 - +5.0 | 1.24 | 99.6 |
Specification note: Density and weight units are retained as printed in the source brochure. Please verify the applicable unit, calculation basis, tolerance and commercial specification against the final technical drawing, quotation and order documentation before engineering use.
Processing & Custom Machining
The brochure presents PSU sheet, rod and machined components as available product forms. For custom PSU parts, technical evaluation should be based on the actual component drawing and service conditions rather than material name alone.
- 2D engineering drawing or 3D model
- Required dimensions and dimensional tolerances
- Material grade and required appearance
- Quantity or annual demand
- Operating temperature and thermal cycling conditions
- Contact chemicals, fluids or cleaning agents
- Steam sterilization or disinfection conditions where applicable
- Mechanical load, wear and dimensional-stability requirements
Aplicaciones
| Application Field | Source-Based Application Focus |
| Electrical & electronics | Electrical insulation, structural components and parts requiring stable dielectric performance |
| Automoción | Components exposed to elevated temperatures and demanding engineering conditions |
| Mechanical equipment | Machined structural components requiring strength, rigidity and dimensional stability |
| Hot-water applications | Components exposed to hot water, steam and repeated cleaning conditions |
| Tools & machinery | Engineering parts requiring heat resistance, chemical resistance and mechanical stability |
| Food-contact-related applications | The brochure highlights physiological inertness for food-contact applications; exact grade suitability should be verified |
Why PSU Is Selected
PSU is suited to applications where heat resistance must be combined with mechanical strength, dimensional stability, hydrolysis resistance and electrical performance. Its resistance to repeated steam exposure and high-energy radiation further broadens its potential use in industrial, electrical, mechanical and hot-water environments.
PSU Selection Guide
| Requirement | Selection Consideration |
| Repeated steam exposure | Consider PSU and confirm the actual steam cycle and grade suitability. |
| Electrical insulation | Evaluate dielectric and insulation requirements together with operating temperature. |
| Dimensional stability | PSU is highlighted for good dimensional stability and creep resistance. |
| Radiation exposure | The brochure highlights resistance to gamma and X-ray radiation; confirm the actual dose and service conditions. |
| Food-contact use | Confirm the exact grade, regulatory documentation and intended food-contact conditions. |
| Machined components | Select rod or sheet according to geometry, machining route and tolerance requirements. |
Temperature Specification Note
The supplied brochure contains more than one temperature-related statement for PSU: the material overview mentions a working range of approximately -100°C to 100°C, while the performance section states long-term use from 100°C to 160°C and identifies a highest continuous air temperature of 150°C. These statements are reproduced as source information and are not reconciled here. For engineering selection, the applicable temperature limit should be confirmed against the exact PSU grade and current technical documentation.
Specification & Certification Note
The technical values and descriptions in this document are based on the supplied Guangdong Zhenghao PEEK product brochure, specifically the PSU material and plate/rod specification pages. Where the brochure indicates food-contact-related inertness or other application suitability, the exact grade and applicable regulatory documentation should be confirmed before commercial or regulated use.
Yozonetech PSU Supply Support
Yozonetech can present PSU semi-finished materials and custom machined components for international engineering-plastics buyers. For quotation and technical evaluation, customers should provide the required product form, dimensions, tolerance, material grade, quantity and service conditions.