Notícias
-
PTFE vs FEP Small Bore Tubing Dimensions Routing and Flow Requirements
Ler maisYozonetech Application illustration. Not a customer photograph, test record or product performance guarantee. A small bore tube must fit the connection, follow the equipment route and support the required fluid behavior. Comparing PTFE capillary tubing with FEP tubing therefore begins with dimensions and application conditions, rather than a general ranking of the polymers. FEP offers a transparent […]
-
Custom PTFE Tubing from China Tolerances Lengths and Quotation Tradeoffs
Ler maisYozonetech Application illustration. Not a customer photograph, test record or product performance guarantee. When sourcing custom PTFE tubing from China, the lowest price per metre is meaningful only when suppliers quote the same drawing, length arrangement and inspection scope. A tighter tolerance, a shorter cut length or a different packaging requirement can change the work involved […]
-
FEP Heat Shrink for Stepped Components Installation Clearance and Coverage
Ler maisYozonetech Application illustration. Not a customer photograph, test record or product performance guarantee. Selecting FEP heat shrink tubing for a stepped component requires two dimensional checks: the sleeve must pass over the largest feature, and it must recover sufficiently around the area needing protection. A connector, shoulder or changing diameter makes the complete installation path relevant […]
-
Combining FEP Tubing and Heat Shrink Orders Without Mixing Specifications
Ler maisYozonetech Application illustration. Not a customer photograph, test record or product performance guarantee. Purchasing FEP tubing and FEP heat shrink tubing from one Chinese supplier can simplify communication and shipment planning. The two products still need separate specifications, sample approvals and receiving checks. Combine the commercial order while keeping each product clearly identified through production, packing and […]
-
FEP vs PFA Tubing for Chemical Transfer Defining the Operating Envelope
Ler maisYozonetech Application illustration for comparing FEP and PFA chemical transfer requirements. No pressure rating or compatibility result is implied. Choosing between FEP tubing and PFA tubing for chemical transfer starts with the operating conditions of the complete line. The material name alone does not determine the allowable working pressure, connection reliability or suitability for a particular chemical […]
-
Sourcing PFA Tubing Cleanliness Evidence Packaging and Sample Approval
Ler maisYozonetech Application illustration of PFA tubing packaging and sample approval. Not a customer photograph or a cleanliness test result. Buying PFA tubing from China requires more than matching an outside diameter. For a contamination-sensitive project, the purchase specification should explain what cleanliness means, how it will be demonstrated, and how the approved tubing will be protected […]
-
PTFE Spiral Wrap vs Heat Shrink for Branching Wire Harnesses
Ler maisYozonetech For a branching wire harness, choose the construction before choosing a material name. PTFE spiral wrap and fluoropolymer heat shrink tubing solve different installation problems. The first is open and serviceable. The second is a continuous sleeve after recovery. Neither is automatically the better choice. Product illustration comparing an open spiral wrap for branch […]
-
Buying PTFE Spiral Cut Tubing from China
Ler maisYozonetech PTFE spiral cut tubing is purchased as a protective organizer for wire, cable or small-tube bundles. It is an open spiral construction, so the first buying decision is not pressure or flow capacity. It is whether the wrap fits the bundle, permits the required branch exits and remains practical for installation and service. Product […]
+86-13752771911
E-mail:ptfetube@yozonetech.cn


